Dyna-Glo RMC-LPC200DG Liquid Propane Heater Review and Features

Description

My Honest Take on the Dyna-Glo RMC-LPC200DG 50,000 to 200,000 BTU Liquid Propane Convection Heater

When I first got my hands on the Dyna-Glo RMC-LPC200DG, I wasn’t entirely sure what to expect from a propane convection heater with such a wide heating capacity—50,000 to 200,000 BTUs. Let me tell you, this heater is a powerhouse, but it’s not without its quirks. Whether you’re using it in your garage, construction site, or a spacious workshop, it gets things toasty real fast, but there are definitely some things to watch out for.

My First Encounter With the Heater

Picture this: It’s mid-January, and my garage feels more like a walk-in freezer. I unboxed the Dyna-Glo RMC-LPC200DG, connected the propane tank (after hunting for a regulator, which thankfully was included), and fired it up. The piezo ignition? A bit finicky at first, but eventually, I got the hang of it. After a slight learning curve—and a few choice words muttered under my breath—it roared to life like a jet engine.

Speaking of jets, on its highest setting, this thing is loud. Not “background noise” loud, but “I need earplugs” loud. It’s a trade-off for the rapid heating power—my 2-car garage went from an icy 35°F to a cozy 65°F in under 20 minutes. Impressive, right?

The Good and the Not-So-Good

I’ll start with the positives. The 360° heat radius is a game-changer. Unlike those radiant heaters that only warm up the area directly in front of them, this convection heater spreads warmth everywhere. The continuously variable heat control is another perk, allowing me to dial in just the right amount of heat without overdoing it.

However, the lightweight build (just 12.5 pounds) is a double-edged sword. It’s super portable, yes, but it also feels a bit flimsy. I accidentally bumped it with a 2×4, and let’s just say the metal dented easier than I’d hoped. Also, the propane consumption can be a bit heavy on higher settings, so if you’re planning on running this bad boy for hours, invest in a bigger propane tank or be prepared to refill often.

Family and Friends’ Reactions

My cousin borrowed this heater for his uninsulated workshop during a family gathering, and everyone was impressed—until the tank ran out. That’s when we learned the hard way that propane heaters need constant monitoring. My teenage nephew also pointed out that the heater gets extremely hot to the touch, so it’s definitely not something you want near pets or kids.

Comparing It to Competitors

Compared to the Mr. Heater MH60QFAV, the Dyna-Glo wins in terms of heating capacity (200,000 BTUs vs. 60,000 BTUs), but it falls short in noise control. The Mr. Heater model is significantly quieter but lacks the 360° heat radius that I now can’t live without. If you’re looking for something quieter and you don’t need as much heat, the Mr. Heater might be a better choice.

On the other hand, the DeWalt DXH70CFAV is another strong contender. It’s quieter and more durable but comes at a higher price point. The Dyna-Glo RMC-LPC200DG hits a sweet spot for those who want maximum heat at a reasonable cost.

Is It Worth the Investment?

The value for money here is solid if you need to heat large spaces quickly. Its energy efficiency is decent for a propane heater, and while it’s not the cheapest way to stay warm, it’s significantly more cost-effective than cranking up an electric heater for similar-sized spaces. Over time, the propane costs do add up, but the fast heating ability offsets that for me.

Features Breakdown

The automatic overheat shutoff is a lifesaver, especially for someone as paranoid as me about fire hazards. The inner windshield? I guess it helps against drafts, though I haven’t noticed a huge difference. The inclusion of a 10-foot hose and regulator is a nice touch—no last-minute trips to the hardware store! But let’s not forget the no electricity required feature. This heater is a champ during power outages, and it’s one of the reasons I chose it over electric alternatives.

Overall, the Dyna-Glo RMC-LPC200DG is a solid heater for anyone needing serious heat output in large, well-ventilated spaces. However, it’s not without its challenges, and you’ll need to handle it with care.

Pros

• Powerful Heating Capacity: With 50,000 to 200,000 BTUs, this heater can handle large spaces up to 4,700 square feet.
• 360° Heat Distribution: Ensures even warming across the entire area.
• Portable Design: Weighing only 12.5 pounds, it’s easy to move around.
• No Electricity Needed: Ideal for power outages or remote locations.
• Safety Features: Includes automatic overheat shutoff and a sturdy base to prevent tipping.

Cons

• Noise Levels: Extremely loud on higher settings, comparable to a jet engine.
• Flimsy Construction: Thin sheet metal dents easily.
• High Propane Consumption: Drains smaller tanks quickly, especially on max heat.
• Ignition Issues: The piezo ignition can be temperamental and requires patience.
• Hot Exterior: The outer casing gets extremely hot, posing a burn hazard.

What Comes With the Heater

• Dyna-Glo RMC-LPC200DG Heater Unit
• 10-Foot Hose
• Propane Regulator
• User Manual

How to Use Guide

1. Connect the Propane Tank: Attach the included hose and regulator to your propane tank securely.
2. Position the Heater: Place it on a flat, stable surface in a well-ventilated area.
3. Ignite: Press and hold the ignition button while turning the gas knob to your desired heat level.
4. Adjust Heat: Use the variable heat setting to control the temperature.
5. Monitor: Keep an eye on propane levels and ensure ventilation remains adequate.

Heater Use Cases

• Workshops: Perfect for warming up garages or woodworking spaces.
• Construction Sites: Ideal for outdoor or semi-covered areas.
• Emergency Heating: Great during power outages or in remote cabins.
• Event Tents: Can be used for outdoor gatherings with proper ventilation.
• Seasonal Use: Particularly useful in colder months when electricity-based systems are insufficient.

How to Maintain

• Clean the Burner: Remove dust and debris regularly to ensure efficient heating.
• Check Connections: Inspect the hose and regulator for leaks before each use.
• Store Safely: Keep in a dry, cool place when not in use.
• Inspect for Damage: Check for dents or wear on the outer casing.
• Test the Ignition: Periodically ensure the piezo ignition is functioning smoothly.

Expert Tips & Recommendations

• Use a carbon monoxide detector in enclosed spaces for added safety.
• Pair with a fan to circulate heat more evenly across larger areas.
• Invest in a larger propane tank (e.g., 40 lbs.) for extended use without interruptions.
• Always read the manual before first use to avoid ignition issues.

Safety and Best Practices

• Keep Away from Flammable Materials: Maintain a safe distance from curtains, furniture, and other items.
• Supervise Use: Never leave the heater unattended while in operation.
• Ensure Ventilation: Always operate in a well-ventilated space to prevent carbon monoxide buildup.
• Avoid Touching: Use gloves or tools to handle the heater after it’s been running.
• Fire Prevention: Always have a fire extinguisher nearby.

Warranty & Support Information

The Dyna-Glo RMC-LPC200DG comes with a manufacturer’s warranty (specific duration varies by retailer). Warranty covers defects in materials and workmanship but does not include damage from misuse or regular wear and tear. For support, contact Dyna-Glo customer service or consult their website for troubleshooting guides and replacement parts.

Additional information